<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>Smarthome &#8211; www.MyKaefer.net</title>
	<atom:link href="https://www.mykaefer.net/category/smarthome/feed/" rel="self" type="application/rss+xml" />
	<link>https://www.mykaefer.net</link>
	<description>Technik - Energie - Fahrzeuge</description>
	<lastBuildDate>Thu, 24 Jul 2025 10:16:03 +0000</lastBuildDate>
	<language>de</language>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	<generator>https://wordpress.org/?v=6.9.4</generator>

<image>
	<url>https://www.mykaefer.net/wp-content/uploads/2026/04/mykaefer-favicon-512px-1-150x150.png</url>
	<title>Smarthome &#8211; www.MyKaefer.net</title>
	<link>https://www.mykaefer.net</link>
	<width>32</width>
	<height>32</height>
</image> 
<site xmlns="com-wordpress:feed-additions:1">241502552</site>	<item>
		<title>SoC-Badge: Hausakku-Füllstand auf einen Blick – für unter 5 € selbst gebaut</title>
		<link>https://www.mykaefer.net/soc-badge-hausakku-fuellstand-auf-einen-blick-fuer-unter-5-e-selbst-gebaut/</link>
					<comments>https://www.mykaefer.net/soc-badge-hausakku-fuellstand-auf-einen-blick-fuer-unter-5-e-selbst-gebaut/#respond</comments>
		
		<dc:creator><![CDATA[kV]]></dc:creator>
		<pubDate>Fri, 18 Jul 2025 09:59:51 +0000</pubDate>
				<category><![CDATA[Arduino]]></category>
		<category><![CDATA[Smarthome]]></category>
		<category><![CDATA[3D-Druck]]></category>
		<category><![CDATA[DIY]]></category>
		<category><![CDATA[Eigenverbrauch]]></category>
		<category><![CDATA[Energieanzeige]]></category>
		<category><![CDATA[ESP8266]]></category>
		<category><![CDATA[Hausakku]]></category>
		<category><![CDATA[HomeAssistant]]></category>
		<category><![CDATA[ioBroker]]></category>
		<category><![CDATA[Ladezustand]]></category>
		<category><![CDATA[LEDs]]></category>
		<category><![CDATA[Microcontroller]]></category>
		<category><![CDATA[MQTT]]></category>
		<category><![CDATA[MQTT-Display]]></category>
		<category><![CDATA[Node-RED]]></category>
		<category><![CDATA[Platinenbau]]></category>
		<category><![CDATA[SoC-Badge]]></category>
		<category><![CDATA[Solarstrom]]></category>
		<category><![CDATA[Strom sparen]]></category>
		<category><![CDATA[Wemos D1 mini]]></category>
		<category><![CDATA[WLAN]]></category>
		<guid isPermaLink="false">https://www.mykaefer.net/?p=1013</guid>

					<description><![CDATA[Ein kleines Gerät, große Wirkung: Der SoC-Badge zeigt den Ladezustand deines Hausakkus per MQTT und LEDs überall dort an, wo du ihn brauchst. Für ein paar Euro nachgebaut, beliebig erweiterbar und perfekt für alle, die ihren Solarstrom gezielt nutzen wollen – ohne ständig zum Wandtablet zu rennen.]]></description>
		
					<wfw:commentRss>https://www.mykaefer.net/soc-badge-hausakku-fuellstand-auf-einen-blick-fuer-unter-5-e-selbst-gebaut/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">1013</post-id>	</item>
		<item>
		<title>MQTT Watchdog in Node-RED: Die Verbindung zum ioBroker absichern</title>
		<link>https://www.mykaefer.net/mqtt-watchdog-in-node-red-die-verbindung-zum-iobroker-absichern/</link>
					<comments>https://www.mykaefer.net/mqtt-watchdog-in-node-red-die-verbindung-zum-iobroker-absichern/#respond</comments>
		
		<dc:creator><![CDATA[kV]]></dc:creator>
		<pubDate>Wed, 16 Jul 2025 08:00:20 +0000</pubDate>
				<category><![CDATA[ioBroker]]></category>
		<category><![CDATA[Node-RED]]></category>
		<category><![CDATA[Smarthome]]></category>
		<category><![CDATA[automatischer flow restart]]></category>
		<category><![CDATA[iobroker script mqtt]]></category>
		<category><![CDATA[MQTT]]></category>
		<category><![CDATA[mqtt adapter hängt]]></category>
		<category><![CDATA[mqtt automatisch neu starten]]></category>
		<category><![CDATA[mqtt fehlerbehebung]]></category>
		<category><![CDATA[mqtt flow deploy]]></category>
		<category><![CDATA[mqtt in iobroker]]></category>
		<category><![CDATA[mqtt in node-red]]></category>
		<category><![CDATA[mqtt reconnect]]></category>
		<category><![CDATA[mqtt verbindung prüfen]]></category>
		<category><![CDATA[mqtt watchdog]]></category>
		<category><![CDATA[node-red http api]]></category>
		<category><![CDATA[stabilität mqtt verbindung]]></category>
		<category><![CDATA[watchdog script]]></category>
		<guid isPermaLink="false">https://www.mykaefer.net/?p=975</guid>

					<description><![CDATA[MQTT ist die Brücke zwischen ioBroker und Node-RED – doch bei instabiler Verbindung kann genau diese Brücke zusammenbrechen: Der MQTT-Adapter friert ein und bleibt dauerhaft im „Connecting“-Status hängen. Ich zeige dir, wie du mit einfachen Mitteln in Node-RED und ioBroker eine gegenseitige Überwachung aufbaust, die eingefrorene Verbindungen automatisch erkennt und zuverlässig neu startet – ganz ohne manuelles Eingreifen.]]></description>
		
					<wfw:commentRss>https://www.mykaefer.net/mqtt-watchdog-in-node-red-die-verbindung-zum-iobroker-absichern/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">975</post-id>	</item>
		<item>
		<title>Addieren mit Node-RED</title>
		<link>https://www.mykaefer.net/addieren-mit-node-red/</link>
					<comments>https://www.mykaefer.net/addieren-mit-node-red/#respond</comments>
		
		<dc:creator><![CDATA[kV]]></dc:creator>
		<pubDate>Sat, 14 Jun 2025 20:30:20 +0000</pubDate>
				<category><![CDATA[Node-RED]]></category>
		<category><![CDATA[Smarthome]]></category>
		<category><![CDATA[Addition]]></category>
		<category><![CDATA[digitale Rechner]]></category>
		<category><![CDATA[Flow-Context]]></category>
		<category><![CDATA[Flows strukturieren]]></category>
		<category><![CDATA[function-Node]]></category>
		<category><![CDATA[Funktionscode]]></category>
		<category><![CDATA[grafische Verkettung umgehen]]></category>
		<category><![CDATA[JavaScript reduce-Funktion]]></category>
		<category><![CDATA[Key eindeutig setzen]]></category>
		<category><![CDATA[komplexe Berechnungen]]></category>
		<category><![CDATA[Kontextzugriff]]></category>
		<category><![CDATA[Langzeitspeicher]]></category>
		<category><![CDATA[mehrere Eingänge]]></category>
		<category><![CDATA[msg.payload]]></category>
		<category><![CDATA[msg.topic]]></category>
		<category><![CDATA[Nachrichtenverarbeitung]]></category>
		<category><![CDATA[Rechnen in Node-RED]]></category>
		<category><![CDATA[temporärer Speicher]]></category>
		<category><![CDATA[Werte speichern]]></category>
		<category><![CDATA[Werte summieren]]></category>
		<category><![CDATA[Wiederverwendbarkeit]]></category>
		<category><![CDATA[Zwischenspeicherung]]></category>
		<guid isPermaLink="false">https://www.mykaefer.net/?p=892</guid>

					<description><![CDATA[In Node-RED gibt es keine klassischen Rechen-Module mit mehreren Eingängen – stattdessen müssen Werte zwischengespeichert und über Nachrichten verarbeitet werden. Dieser Artikel zeigt, wie man eine einfache und wiederverwendbare Funktion zur Addition beliebig vieler Eingangswerte umsetzt, inklusive Nutzung des Flow-Kontexts und Erklärung der modernen .reduce()-Methode.]]></description>
		
					<wfw:commentRss>https://www.mykaefer.net/addieren-mit-node-red/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">892</post-id>	</item>
		<item>
		<title>MQTT-Handling in Node-RED</title>
		<link>https://www.mykaefer.net/mqtt-handling-in-node-red/</link>
					<comments>https://www.mykaefer.net/mqtt-handling-in-node-red/#respond</comments>
		
		<dc:creator><![CDATA[kV]]></dc:creator>
		<pubDate>Thu, 12 Jun 2025 19:18:45 +0000</pubDate>
				<category><![CDATA[Node-RED]]></category>
		<category><![CDATA[Smarthome]]></category>
		<category><![CDATA[Automatisierung]]></category>
		<category><![CDATA[Change-Node]]></category>
		<category><![CDATA[CPU-Auslastung]]></category>
		<category><![CDATA[Datenpunkte]]></category>
		<category><![CDATA[Datenverarbeitung]]></category>
		<category><![CDATA[Echtzeitverarbeitung]]></category>
		<category><![CDATA[Einzelwertabfrage]]></category>
		<category><![CDATA[Energieeffizienz]]></category>
		<category><![CDATA[Filterung]]></category>
		<category><![CDATA[Flows]]></category>
		<category><![CDATA[ioBroker]]></category>
		<category><![CDATA[Link-Node]]></category>
		<category><![CDATA[MQTT]]></category>
		<category><![CDATA[MQTT-in]]></category>
		<category><![CDATA[MQTT-Node]]></category>
		<category><![CDATA[MQTT-out]]></category>
		<category><![CDATA[msg-Objekt]]></category>
		<category><![CDATA[msg.payload]]></category>
		<category><![CDATA[msg.topic]]></category>
		<category><![CDATA[Netzwerklast]]></category>
		<category><![CDATA[Performance]]></category>
		<category><![CDATA[RAM-Auslastung]]></category>
		<category><![CDATA[Schaltzustände]]></category>
		<category><![CDATA[Speicherlast]]></category>
		<category><![CDATA[Statuswerte]]></category>
		<category><![CDATA[switch-Node]]></category>
		<category><![CDATA[Systementlastung]]></category>
		<category><![CDATA[topic-Filtern]]></category>
		<category><![CDATA[Topics]]></category>
		<category><![CDATA[Wildcard]]></category>
		<category><![CDATA[Wildcard-Abfrage]]></category>
		<category><![CDATA[zentrale MQTT-Verwaltung]]></category>
		<category><![CDATA[zentrale Steuerung]]></category>
		<guid isPermaLink="false">https://www.mykaefer.net/?p=870</guid>

					<description><![CDATA[Effizientes MQTT-Handling in Node-RED: Wie man bei vielen Datenpunkten die Übersicht behält, MQTT-Verbindungen performant gestaltet und mit Wildcards sowie Switch- und Link-Nodes Ordnung in komplexe Flows bringt – so bleibt dein System schnell und stabil.]]></description>
		
					<wfw:commentRss>https://www.mykaefer.net/mqtt-handling-in-node-red/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">870</post-id>	</item>
		<item>
		<title>Erste Flows und die grundsätzliche Funktionsweise von Node-RED</title>
		<link>https://www.mykaefer.net/erste-flows-und-die-grundsaetzliche-funktionsweise-von-node-red/</link>
					<comments>https://www.mykaefer.net/erste-flows-und-die-grundsaetzliche-funktionsweise-von-node-red/#respond</comments>
		
		<dc:creator><![CDATA[kV]]></dc:creator>
		<pubDate>Tue, 10 Jun 2025 20:05:04 +0000</pubDate>
				<category><![CDATA[Linux]]></category>
		<category><![CDATA[Node-RED]]></category>
		<category><![CDATA[Smarthome]]></category>
		<category><![CDATA[Ausgabe]]></category>
		<category><![CDATA[Blockly]]></category>
		<category><![CDATA[boolean]]></category>
		<category><![CDATA[Calculator-Node]]></category>
		<category><![CDATA[Datenstruktur]]></category>
		<category><![CDATA[Datenverarbeitung]]></category>
		<category><![CDATA[einfache Automatisierung]]></category>
		<category><![CDATA[Eingabe]]></category>
		<category><![CDATA[Entwicklerwerkzeug]]></category>
		<category><![CDATA[Ergebnisweitergabe]]></category>
		<category><![CDATA[EVA-Prinzip]]></category>
		<category><![CDATA[false]]></category>
		<category><![CDATA[Flow]]></category>
		<category><![CDATA[flow.get]]></category>
		<category><![CDATA[flow.set]]></category>
		<category><![CDATA[Funktionsnode]]></category>
		<category><![CDATA[Funktionsweise]]></category>
		<category><![CDATA[grafische Oberfläche]]></category>
		<category><![CDATA[Informationsfluss]]></category>
		<category><![CDATA[ioBroker]]></category>
		<category><![CDATA[JavaScript]]></category>
		<category><![CDATA[JavaScript-Grundkenntnisse]]></category>
		<category><![CDATA[komplexe Funktionen]]></category>
		<category><![CDATA[let]]></category>
		<category><![CDATA[logische Verknüpfung]]></category>
		<category><![CDATA[MQTT]]></category>
		<category><![CDATA[msg]]></category>
		<category><![CDATA[msg-Objekt]]></category>
		<category><![CDATA[msg.payload]]></category>
		<category><![CDATA[msg.topic]]></category>
		<category><![CDATA[Nachrichten]]></category>
		<category><![CDATA[Nachrichtenverarbeitung]]></category>
		<category><![CDATA[persistenter Speicher]]></category>
		<category><![CDATA[return]]></category>
		<category><![CDATA[Speicherverwaltung]]></category>
		<category><![CDATA[Subtraktion]]></category>
		<category><![CDATA[Syntax]]></category>
		<category><![CDATA[Topic]]></category>
		<category><![CDATA[Trigger]]></category>
		<category><![CDATA[true]]></category>
		<category><![CDATA[Variablen]]></category>
		<category><![CDATA[Verarbeitung]]></category>
		<category><![CDATA[Werte vergleichen]]></category>
		<category><![CDATA[Wiederverwendung]]></category>
		<category><![CDATA[Zwischenspeichern]]></category>
		<guid isPermaLink="false">https://www.mykaefer.net/?p=850</guid>

					<description><![CDATA[Erfahre wie Node-RED weit über einfache Schaltaufgaben hinausgeht. Anhand eines konkreten Beispiels lernst du, wie Informationen über msg.payload und msg.topic verarbeitet, zwischengespeichert und mithilfe von JavaScript-Funktionen gezielt weiterverarbeitet werden – inklusive persistenter Speicherung im Flow. So bekommst du ein tiefes Verständnis für die Funktionsweise von Node-RED und seine Möglichkeiten im Smart-Home-Einsatz.]]></description>
		
					<wfw:commentRss>https://www.mykaefer.net/erste-flows-und-die-grundsaetzliche-funktionsweise-von-node-red/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">850</post-id>	</item>
		<item>
		<title>Node-RED als eigenständige Instanz mit dem ioBroker verbinden</title>
		<link>https://www.mykaefer.net/node-red-als-eigenstaendige-instanz-mit-dem-iobroker-verbinden/</link>
					<comments>https://www.mykaefer.net/node-red-als-eigenstaendige-instanz-mit-dem-iobroker-verbinden/#respond</comments>
		
		<dc:creator><![CDATA[kV]]></dc:creator>
		<pubDate>Sun, 08 Jun 2025 13:11:46 +0000</pubDate>
				<category><![CDATA[ioBroker]]></category>
		<category><![CDATA[Linux]]></category>
		<category><![CDATA[Proxmox-VE]]></category>
		<category><![CDATA[Smarthome]]></category>
		<category><![CDATA[Adapter]]></category>
		<category><![CDATA[Automatisierung]]></category>
		<category><![CDATA[Container]]></category>
		<category><![CDATA[Debugging]]></category>
		<category><![CDATA[Installation]]></category>
		<category><![CDATA[JavaScript]]></category>
		<category><![CDATA[Konfiguration]]></category>
		<category><![CDATA[Lastverteilung]]></category>
		<category><![CDATA[LXC-Container]]></category>
		<category><![CDATA[MQTT]]></category>
		<category><![CDATA[Multicore]]></category>
		<category><![CDATA[Netzwerk]]></category>
		<category><![CDATA[Node-RED]]></category>
		<category><![CDATA[Node.js]]></category>
		<category><![CDATA[Performance]]></category>
		<category><![CDATA[Proxmox Helper Scripts]]></category>
		<category><![CDATA[Proxmox VE]]></category>
		<category><![CDATA[Ressourcenmanagement]]></category>
		<category><![CDATA[Sicherheit]]></category>
		<category><![CDATA[Systemtrennung]]></category>
		<category><![CDATA[Virtualisierung]]></category>
		<category><![CDATA[Visualisierung]]></category>
		<category><![CDATA[Vollzugriff]]></category>
		<guid isPermaLink="false">https://www.mykaefer.net/?p=802</guid>

					<description><![CDATA[Node-RED lässt sich nicht nur als Adapter im ioBroker nutzen – in dieser Anleitung zeige ich, wie du Node-RED als eigenständige Instanz in einem Proxmox-LXC-Container betreibst. Das sorgt für deutlich mehr Performance, bessere Lastverteilung und flexible Erweiterbarkeit. Über MQTT wird anschließend die Verbindung zum ioBroker hergestellt – inklusive Schritt-für-Schritt-Anleitung zur Einrichtung.]]></description>
		
					<wfw:commentRss>https://www.mykaefer.net/node-red-als-eigenstaendige-instanz-mit-dem-iobroker-verbinden/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">802</post-id>	</item>
		<item>
		<title>Node-RED als Adapter in den ioBroker integrieren</title>
		<link>https://www.mykaefer.net/node-red-als-adapter-in-den-iobroker-integrieren/</link>
					<comments>https://www.mykaefer.net/node-red-als-adapter-in-den-iobroker-integrieren/#respond</comments>
		
		<dc:creator><![CDATA[kV]]></dc:creator>
		<pubDate>Sun, 08 Jun 2025 07:37:27 +0000</pubDate>
				<category><![CDATA[ioBroker]]></category>
		<category><![CDATA[Smarthome]]></category>
		<category><![CDATA[0_userdata]]></category>
		<category><![CDATA[Adapter]]></category>
		<category><![CDATA[Adapter-Katalog]]></category>
		<category><![CDATA[Admin-Oberfläche]]></category>
		<category><![CDATA[Aktoren]]></category>
		<category><![CDATA[connected]]></category>
		<category><![CDATA[Debug-Node]]></category>
		<category><![CDATA[Deploy]]></category>
		<category><![CDATA[Drag-and-Drop]]></category>
		<category><![CDATA[Fensterstatus]]></category>
		<category><![CDATA[grafisches Interface]]></category>
		<category><![CDATA[Installation]]></category>
		<category><![CDATA[Instanzen]]></category>
		<category><![CDATA[Integration]]></category>
		<category><![CDATA[ioBroker in]]></category>
		<category><![CDATA[ioBroker Nodes]]></category>
		<category><![CDATA[Konfigurationsdialog]]></category>
		<category><![CDATA[Lizenzbedingungen]]></category>
		<category><![CDATA[logische Verknüpfungen]]></category>
		<category><![CDATA[Node-RED]]></category>
		<category><![CDATA[Node-RED Oberfläche]]></category>
		<category><![CDATA[Port 1880]]></category>
		<category><![CDATA[Proxmox VE]]></category>
		<category><![CDATA[Raspberry Pi]]></category>
		<category><![CDATA[Raumtemperatur]]></category>
		<category><![CDATA[Rollläden]]></category>
		<category><![CDATA[Schalter]]></category>
		<category><![CDATA[Schaltzustände]]></category>
		<category><![CDATA[Sensoren]]></category>
		<category><![CDATA[Sonnenschutz]]></category>
		<category><![CDATA[Topic]]></category>
		<category><![CDATA[Visualisierung]]></category>
		<category><![CDATA[Zugriff auf Objekte]]></category>
		<guid isPermaLink="false">https://www.mykaefer.net/?p=769</guid>

					<description><![CDATA[Ich zeige euch Schritt für Schritt, wie man Node-RED direkt als Adapter in ioBroker integriert. Dadurch lassen sich Datenpunkte ohne Umwege wie MQTT oder REST-API direkt nutzen. Ideal für Einsteiger mit einer Raspberry-Pi-Installation, die Node-RED einfach und nahtlos in ihr Smart-Home-System einbinden wollen.]]></description>
		
					<wfw:commentRss>https://www.mykaefer.net/node-red-als-adapter-in-den-iobroker-integrieren/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">769</post-id>	</item>
		<item>
		<title>Smarthome Standards im Vergleich</title>
		<link>https://www.mykaefer.net/smarthome-standards-im-vergleich/</link>
					<comments>https://www.mykaefer.net/smarthome-standards-im-vergleich/#respond</comments>
		
		<dc:creator><![CDATA[kV]]></dc:creator>
		<pubDate>Sun, 02 Mar 2025 08:28:31 +0000</pubDate>
				<category><![CDATA[Smarthome]]></category>
		<guid isPermaLink="false">https://www.mykaefer.net/?p=509</guid>

					<description><![CDATA[&#8230;oder auch die Frage danach ob Homematic immer noch zeitgemäß ist. Smarthome, das voll vernetzte Gebäude, wo alles automatisiert ist. Displays an den Wänden eines jeden Zimmers, Türen und Fenster öffnen und schließen selbsttätig, Lichter gehen selbstständig an und aus, alles gesteuert von einem Großrechner im Keller, welcher sich hoffentlich niemals einen Virus einfängt oder ... <a title="Smarthome Standards im Vergleich" class="read-more" href="https://www.mykaefer.net/smarthome-standards-im-vergleich/" aria-label="Mehr Informationen über Smarthome Standards im Vergleich">Weiterlesen</a>]]></description>
		
					<wfw:commentRss>https://www.mykaefer.net/smarthome-standards-im-vergleich/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">509</post-id>	</item>
	</channel>
</rss>
